Quantum Scalar i40, User Manual

Page: 177 / 328

Chapter 6: Getting Information About the Library
Viewing Library Information on the Operator Panel
Quantum Scalar i40 and Scalar i80 User’s Guide 151
Viewing Library Information on the Operator Panel
The operator panel provides several brief reports about the library.
Viewing Partition
Information
The operator panel provides an overview of partition information. For
each partition, you can see the following information:
• Online/offline mode
• Control path tape drive location coordinates
• Number of tape drives
• Number of storage slots
• Number of I/E station slots containing a tape cartridge assigned to
the partition
Operator Panel
1 Select Reports > Partitions .
2 Use the Up and Down buttons to select a partition and click Next .
Viewing Network
Settings
A short report on the operator panel displays the library’s network
settings: library name, IP address, and network configuration.
Operator Panel
1 Select Reports > Network Settings .
2 If IPv6 is enabled, the IPv4 information is shown on the first screen.
Press Next to see the IPv6 address information on the next two or
more screens. Although the library can have unlimited IPv6 address,
a maximum of three are shown in this report.