Quantum Scalar i40, User Manual

Page: 134 / 328

Chapter 5: Performing Library Operations
Shutting Down, Restarting, Turning Off, and Removing Power
108 Quantum Scalar i40 and Scalar i80 User’s Guide
magazine slot. If the robot was in the middle of a get or put operation,
it will attempt to complete the operation before shutting down, by
either pushing the cartridge into the destination slot, or removing it
completely from the slot and stopping in a safe location from which it
can move again once power is restored.
Once the shutdown is complete, you can safely turn off the library by
pressing the power button on the front panel (see
Turning Off the
Library on page 111).
Operator Panel
1 Make sure the connected host applications are not sending
commands to the library and that all library operations have
stopped.
2 Press Actions > Shutdown > Shutdown Library .
3 Press Yes to confirm.
A “shutdown in progress” message appears on the operator panel
(see
Figure 22 ).
Figure 22 Shutdown in
Progress Message
4 Wait until the “ready to power down” message appears (see
Figure 23 ).
Figure 23 Ready to Power
Down Message