Chapter 7: Updating Firmware
Updating and Autoleveling Tape Drive Firmware
Quantum Scalar i40 and Scalar i80 User’s Guide
167
4
Select
Upload/remove tape drive firmware for autoleveling
and
click
Next
.
The
Tape Drive Firmware Autolevel
screen appears. The screen lists
the vendor, type, interface type, form factor, and firmware revision
number for all tape drives that the library supports, whether or not
they are installed in the library.
5
Click
Upload
.
The
Upload Tape Drive Images
screen appears. The screen lists the
vendor, type, form factor, and interface type of all tape drives
installed in the library. You can only upload tape drive images for
the listed tape drives.
6
Click
Browse
.
7
Locate the tape drive firmware image file and click
Open
.
8
Click
Apply
. The Progress Window appears. The Progress Window
contains information on the action, elapsed time, and status of the
requested operation. Do one of the following:
• If
Complete
appears in the Progress Window, the tape drive
firmware upload completed. Check to see if a diagnostic ticket
was generated for this operation. For information on diagnostic
tickets, see
About Diagnostic Tickets
on page 244. If no
diagnostic ticket(s) exists, continue to next step.
• If
Failure
appears in the Progress Window, the tape drive
firmware update was not successful. Follow the instructions
listed in the Progress Window to resolve any issues that
occurred during the operation.
9
To initiate autoleveling, see
Initiating Tape Drive Firmware
Autoleveling
on page 169.
Summary of Contents for Scalar i40
