![background image](http://html2.mh-extra.com/html/quantum/scalar-i40/scalar-i40_user-manual_3962593212.webp)
Chapter 8: Installing, Removing, and Replacing Components
Installing the Library In a Rack
186
Quantum Scalar i40 and Scalar i80 User’s Guide
Figure 38 Location for
Installing the Clip Nut or Cage
Nut
Clip nut or cage nut installed in the first
empty hole below rail adapter
Rail adapter
Installing the Library In a Rack
Caution:
Make sure the rack mounting rails are level, both left to
right and front to back. If the library is not level in the rack,
it will not work properly.
WARNING:
At least two people are required to lift and install the
library.
1
If tape drives are installed in the library, you may wish to remove
them to reduce weight. To remove tape drives, unscrew the captive
thumbscrews securing them to the back of the library and slide
them out of the library. Set them down gently on a stable surface.
Summary of Contents for Scalar i40
