Quantum Scalar i40, User Manual

Page: 125 / 328

Chapter 4: Configuring the Library
Configuring Security Settings
Quantum Scalar i40 and Scalar i80 User’s Guide 99
4 Make another selection or press Exit .
5 Save the library configuration (see Saving the Library Configuration
on page 101).
Remote Service Login
Enables or disables remote service user login (from the Web client or
over the Ethernet service port). The service user will still be able to log in
to the library from the operator panel. This setting is enabled by default
(meaning remote service login is allowed).
Operator Panel
1 Select Setup > Security Services > Service User
2 Press Modify .
3 Scroll to select Enabled or Disabled and press Apply .
4 Make another selection or press Exit .
5 Save the library configuration (see Saving the Library Configuration
on page 101).
SSL
Allows you to enable Secure Socket Layer (SSL) for secure data
transmission between the library and remote clients. This setting is
disabled by default.
Enabling SSL settings encrypts all Web browser connections to the Web
client, and it enables SSL-based authentication for SMI-S. SMI-S is the
newest standard of SNMP, which makes sets of data continuously
available. For more information about SMI-S on the library, see SMI-S on
page 96.
Disabling SSL settings creates an unencrypted connection from a Web
browser to the Web client.
See the
Quantum Intelligent Libraries SMI-S Reference Guide
(6-01317-xx) for further configuration and access details.