Chapter 8: Installing, Removing, and Replacing Components
Removing and Replacing the System Control Board
230
Quantum Scalar i40 and Scalar i80 User’s Guide
5
Access the Web client using the IP address and log in using the
default user name and password:
• User name:
admin
• Password:
password
6
Optionally, install tape drive firmware for autoleveling. The library
firmware contains baseline tape drive firmware for autoleveling.
Verify your tape drive firmware is at the level you expect. If not:
a
Upload the tape drive firmware you want to use. From the Web
client, select
Tools > Drive Operations > Upload/remove tape
drive firmware for autoleveling
.
b
Unload all tape cartridges from the tape drives on which you
want to autolevel firmware.
c
Initiate autoleveling by doing one of the following:
• Restart the library (from the operator panel, select
Actions
> Shutdown > Restart Library
.
• Restart all the tape drives you want to autolevel, as follows:
From the Web client, select
Tools > Diagnostics
. Confirm
you want to take the partitions offline. Select
Drives >
Drive Tests > Drive Reset
. Select the applicable partitions
and tape drives, then click
Apply
, then click
OK
.
7
If you changed the IP address from what it was originally, update
host and other applications that access the library.
8
Update the library name, time zone, and any other configuration
settings, if required, using the Web client
Setup
menus.
9
Save the library configuration. From the Web client, select
Tools >
Save/Restore Configuration
. Select
Save Configuration
and click
Apply
. Save the configuration to a known location.
10
It is recommended that you run the Installation and Verification Test
(IVT). From the operator panel, select
Tools > IVT
and follow the
instructions. The IVT takes about 30 minutes. If any problems are
detected, the library issues a diagnostic ticket.
11
Package the old SCB in the packaging that shipped with the new
SCB and send the old SCB back to Quantum.
Summary of Contents for Scalar i40
