Chapter 4: Configuring the Library
Working With Local User Accounts
Quantum Scalar i40 and Scalar i80 User’s Guide
85
12
Press the
Up
button to change the setting to
Enabled
.
13
Press
Apply
.
14
Create and validate the user password the same way you created
the admin password above.
15
Save the library configuration (see
Saving the Library Configuration
on page 101).
Disabling Passwords on
the Operator Panel
If you no longer want to use passwords on the operator panel, you can
disable them. Once you disable the Admin password, the user password
is also automatically disabled. You can only do this on the operator
panel.
Operator Panel
1
Select
Setup > Account Settings > Password Settings
.
Admin Password
is highlighted.
2
Press
Modify
to modify the Admin password.
Enabled
is now highlighted.
3
Press the
Down
button to change the setting to
Disabled
.
4
Press
Apply
.
5
Save the library configuration (see
Saving the Library Configuration
on page 101).
Modifying Passwords
on the Operator Panel
Once passwords are created, you can modify them.
Operator Panel
1
Select
Setup > Account Settings > Modify Password
.
2
Use the
Up
and
Down
buttons to select
admin
or
user
.
3
Press
Apply
.
4
Enter the current password and press
Apply
.
5
Enter a new password and press
Apply
.
Summary of Contents for Scalar i40
