Panasonic U-100PEY1E5, Technical Data & Service Manual

Page: 195 / 739

1-185
1
Single -Type
1-1. Unit Specifi cations
PEY1
3. Ceiling Type S-71PT1E5 / U-71PEY1E5
INDOOR MODEL S-71PT1E5
PANEL MODEL
OUTDOOR MODEL U-71PEY1E5
Branch pipe MODEL -
PERFORMANCE TEST CONDITION ISO5151 / EN14825
POWER SUPPLY
ø, Hz 1ø 50Hz 1ø 50Hz
V 220 230 240 220 230 240 Min Max
C
O
O
L
I
N
G
CAPACITY
kW 7.1 7.1 7.1 2.0 7.7
BTU/h 24200 24200 24200 6800 26300
CURRENT A 0.53 0.52 0.52 12.8 12.4 12.0 - -
INPUT POWER
W 52 52 52 2.645k 2.645k 2.645k - -
TOTAL W - 2.700k 2.700k 2.700k 325 3.300k
ANNUAL CONSUMPTION TOTAL W 4 - - 1350 - - -
EER/EER CLASS TOTAL(W/W) 5/("A"~"G") - - - 2.63 2.63 / D 2.63 6.15 2.33
Erp
6
Pdsign kW - - - - 7.1 -
SEER (W/W) - - - - 5.1 -
Annual consumption kWh - - - - 487 -
Class - - - - A -
POWER FACTOR % - - - 94 93 92 - -
NOISE INDOOR
(H/M/L)
dB-A 39/36/33 -
Power Level dB 58/53/50 -
NOISE OUTDOOR
(H/L)
dB-A 50/-
Power Level dB 70/-
H
E
A
T
I
N
G
CAPACITY
kW 7.1 7.1 7.1 1.8 8.1
BTU/h 24200 24200 24200 6100 27600
CURRENT A 0.53 0.52 0.52 9.30 9.00 8.70 - -
INPUT POWER
W 52 52 52 1.915k 1.915k 1.915k - -
TOTAL W - 1.970k 1.970k 1.970k 275 2.600k
COP/COP CLASS TOTAL(W/W) 5/("A"~"G") - - - 3.60 3.60 / B 3.60 6.55 3.12
Erp
6
Pdsign kW - - - - 6.0 -
Tbivalen °C - - - - -6 -
SCOP (W/W) - - - - 3.8 -
Annual consumption kWh - - - - 2210 -
Class - - - - A -
POWER FACTOR % - - - 94 93 92 - -
NOISE INDOOR
(H/M/L)
dB-A 40/36/33 - ⁄ ⁄
Power Level dB 58/53/50 -
NOISE OUTDOOR
(H/L)
dB-A - 52/- ⁄ ⁄
Power Level dB - 70/-
EXTRA LOW TEMP Total CAPACITY(kW)/INPUT POWER(W)/COP -
MAX CURRENT(A)/MAX INPUT POWER(W) 0.53/52 0.52/52 0.52/52 18/3.720k 18/3.850k 18/3.970k ⁄
STARTING CURRENT(A)/COMP OUTPUT(W) - - - 12.8/2.6k 12.4/2.6k 12.0/2.6k ⁄
NETWORK IMPEDANCE ( Ω MAX.) - -
FM OUTPUT (W) 40 90 ⁄
MOISTURE REMOVAL VOLUME L/h(Pt/h) 4.2 (8.8) -
External static pressure Pa -
I/D AIR
FLOW
COOL m 3 /min (ft 3 /min) 19 (671)
HEAT m
3
/min (ft
3
/min) 19 (671)
O/D AIR
FLOW
COOL m 3
/min (ft
3
/min) 39 (1377)
HEAT m 3 /min (ft 3 /min) 39 (1377)
REFRIGERANT TYPE, AMOUNT g (oz) R410A 1.70k (60.0) /
P
R
O
D
I
M
HEIGHT : H mm(inch) 210 8-9/32 569 22-13/32 /
WIDTH : W mm(inch) 1180 46-15/32 790 31-7/64 /
DEPTH : D mm(inch) 680 26-25/32 285 11-7/32 /
P
A
C D
I
M
HEIGHT : H mm 280 645 /
WIDTH : W mm 1255 921 /
DEPTH : D mm 780 386 /
MASS
(NET) k
g
(lb) 25 (55) 42 (93) /
(GROSS) k g (lb) 28 (62) 46 (101) /
LAYERS LIMIT (actually) 11 (12) 4 (5)
Operation
Condition
Cool O.D(DBT) 18°C ~ 32°C -10°C ~ 43°C
Heat O.D(DBT) 16°C ~ 30°C -15°C ~ 24°C
P
I
P
I
N
G
PIPE DIAMETER mm (inch) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8)
CONNECT METHOD, STD LENGTH m (ft) fl ared type, 5.0(16.4) fl ared type, 5.0(16.4)
PIPE LENGTH RANGE m (ft) 5 ~ 50 (16.4 ~ 164.0) ~ ~
I/D&O/D HEIGHT DIFFERENCE m (ft) 15 (OD located lower) / 30 (OD located higher) (49.2/98.4)
ADD GAS AMOUNT
g
/m (oz/ft) 40 (0.430)
PIPE LENGTH FOR ADDITIONAL GAS m (ft) 20 (65.6)
*1 : In case it is necessary to indicate the air fl ow volume in (l/s), the value in (m
3
/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*2 : If the EUROVENT Certifi ed models can be operated under the “extra-low” temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230 V shall be used.
*3 : Network Impedance shall be applicable for EUROPE and CHINA models.
*4 : The annual consumption is calculated by multiplying the input power at 230 V (400 V) by an average of 500 hours per year in cooling mode.
*5 : EER and COP classification is at 230 V (400 V) only in accordance with EU directive 2002/31/EC.
*6 : SEER and SCOP classification is at 230V(400V) only in accordance with EN-14825. For heating, SCOP indicates the value of only Average heating season,
Other fiche data indicates in an attached sheet.
SM830211-07̲PAC-i.indb 185 SM830211-07̲PAC-i.indb 185 2013/09/17 22:46:55 2013/09/17 22:46:55