Panasonic U-100PEY1E5, Technical Data & Service Manual

Page: 217 / 739

1-207
1
Simultaneous (Twin) -Type
1-1. Unit Specifi cations
PEY1
5. Wall Mounted Type S-36PK1E5×2 / U-71PEY1E5
INDOOR MODEL S-36PK1E5×2
PANEL MODEL -
OUTDOOR MODEL U-71PEY1E5
Branch pipe MODEL -
PERFORMANCE TEST CONDITION ISO5151 / EN14825
POWER SUPPLY
ø, Hz 1ø 50Hz 1ø 50Hz
V 220 230 240 220 230 240 Min Max
C
O
O
L
I
N
G
CAPACITY
kW 7.1 7.1 7.1 2.0 7.7
BTU/h 24200 24200 24200 6800 26300
CURRENT A 0.20×2 0.19×2 0.19×2 11.7 11.3 11.0 - -
INPUT POWER
W 16×2 17×2 17×2 2.420k 2.420k 2.420k - -
TOTAL W - 2.450k 2.450k 2.450k 325 3.000k
ANNUAL CONSUMPTION TOTAL W 4 - 1225 1225 1225 - -
EER/EER CLASS TOTAL(W/W) 5/("A"~"G") - - - 2.90 2.90 / C 2.90 6.15 2.57
Erp
6
Pdsign kW - - - - 7.1 -
SEER (W/W) - - - - 5.1 -
Annual consumption kWh - - - - 487 -
Class - - - - A -
POWER FACTOR % - - - 94 93 92 - -
NOISE INDOOR
(H/M/L)
dB-A 35/31/27 -
Power Level dB 52/46/41 -
NOISE OUTDOOR
(H/L)
dB-A 50/-
Power Level dB 70/-
H
E
A
T
I
N
G
CAPACITY
kW 7.1 7.1 7.1 1.8 8.1
BTU/h 24200 24200 24200 6100 27600
CURRENT A 0.20×2 0.19×2 0.19×2 9.00 8.70 8.50 - -
INPUT POWER
W 16×2 17×2 17×2 1.870k 1.870k 1.870k - -
TOTAL W - 1.900k 1.900k 1.900k 275 2.550k
COP/COP CLASS TOTAL(W/W) 5/("A"~"G") - - - 3.74 3.74 / A 3.74 6.55 3.18
Erp
6
Pdsign kW - - - - 6.0 -
Tbivalen °C - - - - -6 -
SCOP (W/W) - - - - 3.9 -
Annual consumption kWh - - - - 2154 -
Class - - - - A -
POWER FACTOR % - - - 94 93 92 - -
NOISE INDOOR
(H/M/L)
dB-A 35/31/27 - ⁄ ⁄
Power Level dB 52/46/41 -
NOISE OUTDOOR
(H/L)
dB-A - 52/- ⁄ ⁄
Power Level dB - 70/-
EXTRA LOW TEMP Total CAPACITY(kW)/INPUT POWER(W)/COP -
MAX CURRENT(A)/MAX INPUT POWER(W) 0.20×2/16×2 0.19×2/17×2 0.19×2/17×2 18/3.680k 18/3.800k 18/3.930k ⁄
STARTING CURRENT(A)/COMP OUTPUT(W) - - - 11.7/2.4k 11.3/2.4k 10.9/2.4k ⁄
NETWORK IMPEDANCE ( Ω MAX.) - -
FM OUTPUT (W) 47×2 90 ⁄
MOISTURE REMOVAL VOLUME L/h(Pt/h) 4.2 (2.1×2) (8.8) -
External static pressure Pa -
I/D AIR
FLOW
COOL m 3 /min (ft 3 /min) 11×2 (388)×2
HEAT m
3
/min (ft
3
/min) 11×2 (388)×2
O/D AIR
FLOW
COOL m 3 /min (ft 3 /min) 39 (1377)
HEAT m 3 /min (ft 3 /min) 39 (1377)
REFRIGERANT TYPE, AMOUNT g (oz) R410A 1.70k (60.0) /
P
R
O
D
I
M
HEIGHT : H mm(inch) 300 11-1/32 569 22-13/32 /
WIDTH : W mm(inch) 1065 41-15/16 790 31-7/64 /
DEPTH : D mm(inch) 230 9-1/32 285 11-7/32 /
P
A
C D
I
M
HEIGHT : H mm 310 648 /
WIDTH : W mm 1140 921 /
DEPTH : D mm 380 386 /
MASS
(NET) k
g
(lb) 13 (29) 42 (93) /
(GROSS) k g (lb) 17 (37) 46 (101) /
LAYERS LIMIT (actually) 15 (16) 4 (5)
Operation
Condition
Cool O.D(DBT) 18°C ~ 32°C -10°C ~ 43°C
Heat O.D(DBT) 16°C ~ 30°C -15°C ~ 24°C
P
I
P
I
N
G
PIPE DIAMETER mm (inch) (Liquid)ø6.35(1/4) (Gas)ø12.7(1/2) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8)
CONNECT METHOD, STD LENGTH m (ft) fl ared type, 5.0(16.4) fl ared type, 5.0(16.4)
PIPE LENGTH RANGE m (ft) 5 ~ 50 (16.4 ~ 164.0) ~ ~
I/D&O/D HEIGHT DIFFERENCE m (ft) 15 (OD located lower) / 30 (OD located higher) (49.2/98.4)
ADD GAS AMOUNT
g
/m (oz/ft) 40 (0.430)
PIPE LENGTH FOR ADDITIONAL GAS m (ft) 20 (65.6)
*1 : In case it is necessary to indicate the air fl ow volume in (l/s), the value in (m
3
/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*2 : If the EUROVENT Certifi ed models can be operated under the “extra-low” temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230 V shall be used.
*3 : Network Impedance shall be applicable for EUROPE and CHINA models.
*4 : The annual consumption is calculated by multiplying the input power at 230 V (400 V) by an average of 500 hours per year in cooling mode.
*5 : EER and COP classification is at 230 V (400 V) only in accordance with EU directive 2002/31/EC.
*6 : SEER and SCOP classification is at 230V(400V) only in accordance with EN-14825. For heating, SCOP indicates the value of only Average heating season,
Other fiche data indicates in an attached sheet.
SM830211-07̲PAC-i.indb 207 SM830211-07̲PAC-i.indb 207 2013/09/17 22:47:12 2013/09/17 22:47:12