Panasonic U-100PEY1E5, Technical Data & Service Manual

Page: 142 / 739

1-132
1
Simultaneous (Triple) -Type
1-1. Unit Specifi cations
PE1
6. Low Silhouette Ducted Type S-50PF1E5×3 / U-140PE1E8
INDOOR MODEL S-50PF1E5×3
OUTDOOR MODEL U-140PE1E8
Branch pipe MODEL CZ-P3HPC2
PERFORMANCE TEST CONDITION ISO5151 / EN14825
POWER SUPPLY
ø, Hz 1ø 50Hz 3ø 50Hz
V 220 230 240 380 400 415 Min Max
C
O
O
L
I
N
G
CAPACITY
kW 14.0 14.0 14.0 3.3 15.5
BTU/h 47800 47800 47800 11300 52900
CURRENT A 0.77×3 0.74×3 0.71×3 6.69 6.42 6.18 - -
INPUT POWER
W 100×3 100×3 100×3 4.085k 4.085k 4.085k - -
TOTAL W - 4.385k 4.385k 4.385k 840 6.000k
ANNUAL CONSUMPTION TOTAL W 4 - - 2192.5 - - -
EER/EER CLASS TOTAL(W/W) 5/("A"~"G") - - - 3.19 3.19 / B 3.19 3.93 2.58
Erp
6
Pdsign kW - - - - - -
SEER (W/W) - - - - - -
Annual consumption kWh - - - - - -
Class - - - - - -
POWER FACTOR % - - - 93 92 92 - -
NOISE INDOOR
(H/M/L)
dB-A 34/30/26
Power Level dB 56/52/48
NOISE OUTDOOR
(H/L)
dB-A 54/-
Power Level dB 71/-
H
E
A
T
I
N
G
CAPACITY
kW 16.0 16.0 16.0 4.1 18.0
BTU/h 54600 54600 54600 14000 61400
CURRENT A 0.77×3 0.74×3 0.71×3 6.64 6.35 6.15 - -
INPUT POWER
W 100×3 100×3 100×3 4.215k 4.215k 4.215k - -
TOTAL W - 4.515k 4.515k 4.515k 900 5.900k
COP/COP CLASS TOTAL(W/W) 5/("A"~"G") - - - 3.54 3.54 / B 3.54 4.56 3.05
Erp
6
Pdsign kW - - - - - -
Tbivalen °C - - - - - -
SCOP (W/W) - - - - - -
Annual consumption kWh - - - - - -
Class - - - - - -
POWER FACTOR % - - - 96 96 95 - -
NOISE INDOOR
(H/M/L)
dB-A 34/30/26 - ⁄ ⁄
Power Level dB 56/52/48 -
NOISE OUTDOOR
(H/L)
dB-A - 55/- ⁄ ⁄
Power Level dB - 71/-
EXTRA LOW TEMP Total CAPACITY(kW)/INPUT POWER(W)/COP -
MAX CURRENT(A)/MAX INPUT POWER(W) 1.00×3/125×3 0.96×3/125×3 0.92×3/125×3 11.0/6.800k 11.0/7.150k 11.0/7.450k ⁄
STARTING CURRENT(A)/COMP OUTPUT(W) - - - 6.69/3.0k 6.42/3.0k 6.18/3.0k ⁄
NETWORK IMPEDANCE ( Ω MAX.) - -
FM OUTPUT (W) 120 90x2 ⁄
MOISTURE REMOVAL VOLUME L/h(Pt/h) 9.0 (3.0×3) (18.9) -
External static pressure Pa 70 (MIN10 - MAX150)
I/D AIR
FLOW
COOL m 3 /min (ft 3 /min) 16×3 (565)×3
HEAT m 3 /min (ft 3 /min) 16×3 (565)×3
O/D AIR
FLOW
COOL m
3
/min (ft
3
/min) 135 (4767)
HEAT m 3
/min (ft
3
/min) 120 (4238)
REFRIGERANT TYPE, AMOUNT g (oz) R410A 3.40k (119.9) /
P
R
O
D
I
M
HEIGHT : H mm(inch) 290 (11-13/32) 1416 (55-3/4) /
WIDTH : W mm(inch) 800 (31-1/2) 940 (37-1/32) /
DEPTH : D mm(inch) 700 (27-9/16) 340 (13-13/32) /
P
A
C D
I
M
HEIGHT : H mm 355 1556 /
WIDTH : W mm 1014 1055 /
DEPTH : D mm 850 485 /
MASS
(NET) k g (lb) 28 (62) 98 /
(GROSS) k
g
(lb) 35 (78) 108 /
LAYERS LIMIT (actually) 9 (10) 1 (2)
Operation
Condition
Cool O.D(DBT) 18°C ~ 32°C -15°C ~ 46°C
Heat O.D(DBT) 16°C ~ 30°C -20°C ~ 24°C
P
I
P
I
N
G
PIPE DIAMETER mm (inch) (Liquid)ø6.35(1/4) (Gas)ø12.7(1/2) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8)
CONNECT METHOD, STD LENGTH m (ft) fl ared type, 5.0(16.4) fl ared type, 5.0(16.4)
PIPE LENGTH RANGE m (ft) 5 ~ 75 (16.4 ~ 246.1) ~ ~
I/D&O/D HEIGHT DIFFERENCE m (ft) 15 (OD located lower) / 30 (OD located higher) (49.2/98.4)
ADD GAS AMOUNT g /m (oz/ft) 50 (537.6)
PIPE LENGTH FOR ADDITIONAL GAS m (ft) 20 (65.6)
*1 : In case it is necessary to indicate the air fl ow volume in (l/s), the value in (m
3
/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*2 : If the EUROVENT Certifi ed models can be operated under the “extra-low” temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230 V shall be used.
*3 : Network Impedance shall be applicable for EUROPE and CHINA models.
*4
:
The annual consumption is calculated by multiplying the input power at 230 V (400 V) by an average of 500 hours per year in cooling mode.
*5 : EER and COP classification is at 230 V (400 V) only in accordance with EU directive 2002/31/EC.
*6 : SEER and SCOP classification is at 230V(400V) only in accordance with EN-14825. For heating, SCOP indicates the value of only Average heating season,
Other fiche data indicates in an attached sheet.
SM830211-07̲PAC-i.indb 132 SM830211-07̲PAC-i.indb 132 2013/09/17 22:46:16 2013/09/17 22:46:16