Panasonic U-100PEY1E5, Technical Data & Service Manual

Page: 155 / 739

1-145
1
Simultaneous (Triple) -Type
1-1. Unit Specifi cations
PE1
7. Ducted Type S-50PN1E5×3 / U-140PE1E5
INDOOR MODEL S-50PN1E5×3
OUTDOOR MODEL U-140PE1E5
Branch pipe MODEL CZ-P3HPC2
PERFORMANCE TEST CONDITION ISO5151 / EN14825
POWER SUPPLY
ø, Hz 1ø 50Hz 1ø 50Hz
V 220 230 240 220 230 240 Min Max
C
O
O
L
I
N
G
CAPACITY
kW 14.0 14.0 14.0 3.3 15.5
BTU/h 47800 47800 47800 11300 52900
CURRENT A 0.54×3 0.55×3 0.56×3 20.5 20.1 19.50 - -
INPUT POWER
W 115×3 120×3 125×3 4.400k 4.400k 4.400k - -
TOTAL W - 4.745k 4.760k 4.775k 1000 6.200k
ANNUAL CONSUMPTION TOTAL W 4 - - 2380k - - -
EER/EER CLASS TOTAL(W/W) 5/("A"~"G") - - - 2.95 2.94 / C 2.93 3.30 2.50
Erp
6
Pdsign kW - - - - - -
SEER (W/W) - - - - - -
Annual consumption kWh - - - - - -
Class - - - - - -
POWER FACTOR % - - - 98 95 94 - -
NOISE INDOOR
(H/M/L)
dB-A 41/39/35
Power Level dB 58/56/52
NOISE OUTDOOR
(H/L)
dB-A 54/-
Power Level dB 71/-
H
E
A
T
I
N
G
CAPACITY
kW 16.00 16.00 16.00 4.1 18.0
BTU/h 54600 54600 54600 14000 61400
CURRENT A 0.54×3 0.55×3 0.56×3 20.6 20.2 19.6 - -
INPUT POWER
W 115×3 120×3 125×3 4.440k 4.440k 4.440k - -
TOTAL W - 4.785k 4.800k 4.815k 1050 6.100k
COP/COP CLASS TOTAL(W/W) 5/("A"~"G") - - - 3.34 3.33 / C 3.32 3.90 2.95
Erp
6
Pdsign kW - - - - - -
Tbivalen °C - - - - - -
SCOP (W/W) - - - - - -
Annual consumption kWh - - - - - -
Class - - - - - -
POWER FACTOR % - - - 98 96 94 - -
NOISE INDOOR
(H/M/L)
dB-A 41/39/35 - ⁄ ⁄
Power Level dB 58/56/52 -
NOISE OUTDOOR
(H/L)
dB-A - 55/- ⁄ ⁄
Power Level dB - 71/-
EXTRA LOW TEMP Total CAPACITY(kW)/INPUT POWER(W)/COP -
MAX CURRENT(A)/MAX INPUT POWER(W) 0.74×3/165×3 0.76×3/180×3 0.78×3/190×3 30.0/6.450k 30.0/6.650k 30.0/6.850k ⁄
STARTING CURRENT(A)/COMP OUTPUT(W) - - - 20.6/3.0k 20.2/3.0k 19.6/3.0k ⁄
NETWORK IMPEDANCE ( Ω MAX.) - -
FM OUTPUT (W) 85×3 90×2 ⁄
MOISTURE REMOVAL VOLUME L/h(Pt/h) 9.0 (3.0×3) (18.9) -
External static pressure Pa 50 (MIN10 - MAX80)
I/D AIR
FLOW
COOL m 3 /min (ft 3 /min) 16×3 (565)×3
HEAT m 3 /min (ft 3 /min) 16×3 (565)×3
O/D AIR
FLOW
COOL m
3
/min (ft
3
/min) 135 (4767)
HEAT m 3
/min (ft
3
/min) 120 (4238)
REFRIGERANT TYPE, AMOUNT g (oz) R410A 3.40k (119.9) /
P
R
O
D
I
M
HEIGHT : H mm(inch) 250 (9-27/32) 1416 (55-3/4) /
WIDTH : W mm(inch) 780 (+100) (30-23/32) (+3-15/16) 940 (37-1/32) /
DEPTH : D mm(inch) 650 (25-19/32) 340 (13-13/32) /
P
A
C D
I
M
HEIGHT : H mm 345 1556 /
WIDTH : W mm 1007 1055 /
DEPTH : D mm 777 485 /
MASS
(NET) k g (lb) 29 98 /
(GROSS) k
g
(lb) 34 108 /
LAYERS LIMIT (actually) 8 (9) 1 (2)
Operation
Condition
Cool O.D(DBT) 18°C ~ 32°C -15°C ~ 46°C
Heat O.D(DBT) 16°C ~ 30°C -20°C ~ 24°C
P
I
P
I
N
G
PIPE DIAMETER mm (inch) (Liquid)ø6.35(1/4) (Gas)ø12.7(1/2) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8)
CONNECT METHOD, STD LENGTH m (ft) fl ared type, 5.0(16.4) fl ared type, 5.0(16.4)
PIPE LENGTH RANGE m (ft) 5 ~ 75 (16.4 ~ 246.1) ~ ~
I/D&O/D HEIGHT DIFFERENCE m (ft) 15 (OD located lower) / 30 (OD located higher) (49.2/98.4)
ADD GAS AMOUNT g /m (oz/ft) 50 (537.6)
PIPE LENGTH FOR ADDITIONAL GAS m (ft) 20 (65.6)
*1 : In case it is necessary to indicate the air fl ow volume in (l/s), the value in (m
3
/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*2 : If the EUROVENT Certifi ed models can be operated under the “extra-low” temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230 V shall be used.
*3 : Network Impedance shall be applicable for EUROPE and CHINA models.
*4
:
The annual consumption is calculated by multiplying the input power at 230 V (400 V) by an average of 500 hours per year in cooling mode.
*5 : EER and COP classification is at 230 V (400 V) only in accordance with EU directive 2002/31/EC.
*6 : SEER and SCOP classification is at 230V(400V) only in accordance with EN-14825. For heating, SCOP indicates the value of only Average heating season,
Other fiche data indicates in an attached sheet.
SM830211-07̲PAC-i.indb 145 SM830211-07̲PAC-i.indb 145 2013/09/17 22:46:26 2013/09/17 22:46:26