Panasonic U-100PEY1E5, Technical Data & Service Manual

Page: 147 / 739

1-137
1
Single -Type
1-1. Unit Specifi cations
PE1
6. Low Silhouette Ducted Type S-125PF1E5 / U-125PE1E8
INDOOR MODEL S-125PF1E5
OUTDOOR MODEL U-125PE1E8
Branch pipe MODEL -
PERFORMANCE TEST CONDITION ISO5151 / EN14825
POWER SUPPLY
ø, Hz 1ø 50Hz 3ø 50Hz
V 220 230 240 380 400 415 Min Max
C
O
O
L
I
N
G
CAPACITY
kW 12.5 12.5 12.5 3.3 14.0
BTU/h 42700 42700 42700 11300 47800
CURRENT A 1.48 1.44 1.39 5.52 5.29 5.12 - -
INPUT POWER
W 215 215 215 3.355k 3.355k 3.355k - -
TOTAL W - 3.570k 3.570k 3.570k 840 4.600k
ANNUAL CONSUMPTION TOTAL W 4 - - 1785 - - -
EER/EER CLASS TOTAL(W/W) 5/("A"~"G") - - - 3.50 3.50 / A 3.50 3.93 3.04
Erp
6
Pdsign kW - - - - - -
SEER (W/W) - - - - - -
Annual consumption kWh - - - - - -
Class - - - - - -
POWER FACTOR % - - - 92 92 91 - -
NOISE INDOOR
(H/M/L)
dB-A 39/35/32 -
Power Level dB 61/57/54 -
NOISE OUTDOOR
(H/L)
dB-A 53/-
Power Level dB 70/-
H
E
A
T
I
N
G
CAPACITY
kW 14.0 14.0 14.0 4.1 16.0
BTU/h 47800 47800 47800 14000 54600
CURRENT A 1.46 1.42 1.38 5.44 5.26 5.05 - -
INPUT POWER
W 210 210 210 3.270k 3.270k 3.270k - -
TOTAL W - 3.480k 3.480k 3.480k 900 5.200k
COP/COP CLASS TOTAL(W/W) 5/("A"~"G") - - - 4.02 4.02 / A 4.02 4.56 3.08
Erp
6
Pdsign kW - - - - - -
Tbivalen °C - - - - - -
SCOP (W/W) - - - - - -
Annual consumption kWh - - - - - -
Class - - - - - -
POWER FACTOR % - - - 91 90 90 - -
NOISE INDOOR
(H/M/L)
dB-A 39/35/32 - ⁄ ⁄
Power Level dB 61/57/54 -
NOISE OUTDOOR
(H/L)
dB-A - 53/- ⁄ ⁄
Power Level dB - 70/-
EXTRA LOW TEMP Total CAPACITY(kW)/INPUT POWER(W)/COP (Q10.5kW/W5.200kW/COP2.02)
MAX CURRENT(A)/MAX INPUT POWER(W) 1.80/265 1.75/265 1.70/265 10.0/6.200k 10.0/6.500k 10.0/6.750k ⁄
STARTING CURRENT(A)/COMP OUTPUT(W) - - - 5.52/3.0k 5.29/3.0k 5.12/3.0k ⁄
NETWORK IMPEDANCE ( Ω MAX.) - -
FM OUTPUT (W) 200 90×2 ⁄
MOISTURE REMOVAL VOLUME L/h(Pt/h) 7.9 (16.6) -
External static pressure Pa 100 (MIN10 - MAX150)
I/D AIR
FLOW
COOL m 3 /min (ft 3 /min) 34 (1201)
HEAT m 3 /min (ft 3 /min) 34 (1201)
O/D AIR
FLOW
COOL m
3
/min (ft
3
/min) 130 (4591)
HEAT m 3
/min (ft
3
/min) 110 (3885)
REFRIGERANT TYPE, AMOUNT g (oz) R410A 3.40k (119.9) /
P
R
O
D
I
M
HEIGHT : H mm(inch) 290 (11-13/32) 1416 (55-3/4) /
WIDTH : W mm(inch) 1400 (55-1/8) 940 (37-1/32) /
DEPTH : D mm(inch) 700 (27-9/16) 340 (13-13/32) /
P
A
C D
I
M
HEIGHT : H mm 355 1556 /
WIDTH : W mm 1614 1055 /
DEPTH : D mm 850 485 /
MASS
(NET) k g (lb) 45 (99) 98 /
(GROSS) k
g
(lb) 54 (119) 108 /
LAYERS LIMIT (actually) 9 (10) 1 (2)
Operation
Condition
Cool O.D(DBT) 18°C ~ 32°C -15°C ~ 46°C
Heat O.D(DBT) 16°C ~ 30°C -20°C ~ 24°C
P
I
P
I
N
G
PIPE DIAMETER mm (inch) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8)
CONNECT METHOD, STD LENGTH m (ft) fl ared type, 5.0(16.4) fl ared type, 5.0(16.4)
PIPE LENGTH RANGE m (ft) 5 ~ 75 (16.4 ~ 246.1) ~ ~
I/D&O/D HEIGHT DIFFERENCE m (ft) 15 (OD located lower) / 30 (OD located higher) (49.2/98.4)
ADD GAS AMOUNT g /m (oz/ft) 50 (537.6)
PIPE LENGTH FOR ADDITIONAL GAS m (ft) 30 (98.4)
*1 : In case it is necessary to indicate the air fl ow volume in (l/s), the value in (m
3
/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*2 : If the EUROVENT Certifi ed models can be operated under the “extra-low” temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230 V shall be used.
*3 : Network Impedance shall be applicable for EUROPE and CHINA models.
*4
:
The annual consumption is calculated by multiplying the input power at 230 V (400 V) by an average of 500 hours per year in cooling mode.
*5 : EER and COP classification is at 230 V (400 V) only in accordance with EU directive 2002/31/EC.
*6 : SEER and SCOP classification is at 230V(400V) only in accordance with EN-14825. For heating, SCOP indicates the value of only Average heating season,
Other fiche data indicates in an attached sheet.
SM830211-07̲PAC-i.indb 137 SM830211-07̲PAC-i.indb 137 2013/09/17 22:46:19 2013/09/17 22:46:19