Panasonic U-100PEY1E5, Technical Data & Service Manual

Page: 137 / 739

1-127
1
Simultaneous (Twin) -Type
1-1. Unit Specifi cations
PE1
6. Low Silhouette Ducted Type S-36PF1E5×2 / U-71PE1E8
INDOOR MODEL S-36PF1E5×2
OUTDOOR MODEL U-71PE1E8
Branch pipe MODEL CZ-P155BK1
PERFORMANCE TEST CONDITION ISO5151 / EN14825
POWER SUPPLY
ø, Hz 1ø 50Hz 3ø 50Hz
V 220 230 240 380 400 415 Min Max
C
O
O
L
I
N
G
CAPACITY
kW 7.10 7.10 7.10 3.2 8.0
BTU/h 24200 24200 24200 10900 27300
CURRENT A 0.60×2 0.57×2 0.56×2 2.75 2.65 2.60 - -
INPUT POWER
W 70×2 70×2 70×2 1.730k 1.730k 1.730k - -
TOTAL W - 1.870k 1.870k 1.870k 640 2.650k
ANNUAL CONSUMPTION TOTAL W 4 - - 935 - - -
EER/EER CLASS TOTAL(W/W) 5/("A"~"G") - - - 3.80 3.80 / A 3.80 5.00 3.02
Erp
6
Pdsign kW - - - - 7.1 -
SEER (W/W) - - - - 5.8 -
Annual consumption kWh - - - - 428 -
Class - - - - A+ -
POWER FACTOR % - - - 96 94 93 - -
NOISE INDOOR
(H/M/L)
dB-A 33/29/25
Power Level dB 55/51/47
NOISE OUTDOOR
(H/L)
dB-A 48/-
Power Level dB 65/-
H
E
A
T
I
N
G
CAPACITY
kW 8.0 8.0 8.0 2.8 9.0
BTU/h 27300 27300 27300 9600 30700
CURRENT A 0.60×2 0.57×2 0.56×2 3.10 3.00 2.90 - -
INPUT POWER
W 70×2 70×2 70×2 1.960k 1.960k 1.960k - -
TOTAL W - 2.100k 2.100k 2.100k 580 2.900k
COP/COP CLASS TOTAL(W/W) 5/("A"~"G") - - - 3.81 3.81 / A 3.81 4.83 3.10
Erp
6
Pdsign kW - - - - 7.1 -
Tbivalen °C - - - - -9 -
SCOP (W/W) - - - - 3.9 -
Annual consumption kWh - - - - 2548 -
Class - - - - A -
POWER FACTOR % - - - 96 94 94 - -
NOISE INDOOR
(H/M/L)
dB-A 33/29/25 - ⁄ ⁄
Power Level dB 55/51/47 -
NOISE OUTDOOR
(H/L)
dB-A - 50/- ⁄ ⁄
Power Level dB - 67/-
EXTRA LOW TEMP Total CAPACITY(kW)/INPUT POWER(W)/COP -
MAX CURRENT(A)/MAX INPUT POWER(W) 0.86×2/105×2 0.82×2/105×2 0.79×2/105×2 7.0/4.150k 7.0/4.360k 7.0/4.530k ⁄
STARTING CURRENT(A)/COMP OUTPUT(W) - - - 3.10/2.0k 3.00/2.0k 2.90/2.0k ⁄
NETWORK IMPEDANCE ( Ω MAX.) - -
FM OUTPUT (W) 120 90 ⁄
MOISTURE REMOVAL VOLUME L/h(Pt/h) 4.2 (2.1×2) (8.8) -
External static pressure Pa 70 (MIN10 - MAX150)
I/D AIR
FLOW
COOL m 3 /min (ft 3 /min) 14×2 (494)×2
HEAT m 3 /min (ft 3 /min) 14×2 (494)×2
O/D AIR
FLOW
COOL m
3
/min (ft
3
/min) 60 (2119)
HEAT m 3
/min (ft
3
/min) 60 (2119)
REFRIGERANT TYPE, AMOUNT g (oz) R410A 2.35k (82.9) /
P
R
O
D
I
M
HEIGHT : H mm(inch) 290 (11-13/32) 996 (39-7/32) /
WIDTH : W mm(inch) 800 (31-1/2) 940 (37-1/32) /
DEPTH : D mm(inch) 700 (27-9/16) 340 (13-13/32) /
P
A
C D
I
M
HEIGHT : H mm 355 1136 /
WIDTH : W mm 1014 1055 /
DEPTH : D mm 850 485 /
MASS
(NET) k g (lb) 28 (62) 71 (157) /
(GROSS) k
g
(lb) 35 (78) 79 (175) /
LAYERS LIMIT (actually) 9 (10) 2 (3)
Operation
Condition
Cool O.D(DBT) 18°C ~ 32°C -15°C ~ 46°C
Heat O.D(DBT) 16°C ~ 30°C -20°C ~ 24°C
P
I
P
I
N
G
PIPE DIAMETER mm (inch) (Liquid)ø6.35(1/4) (Gas)ø12.7(1/2) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8)
CONNECT METHOD, STD LENGTH m (ft) fl ared type, 5.0(16.4) fl ared type, 5.0(16.4)
PIPE LENGTH RANGE m (ft) 5 ~ 50 (16.4 ~ 164.0) ~ ~
I/D&O/D HEIGHT DIFFERENCE m (ft) 15 (OD located lower) / 30 (OD located higher) (49.2/98.4)
ADD GAS AMOUNT g /m (oz/ft) 50 (537.6)
PIPE LENGTH FOR ADDITIONAL GAS m (ft) 30 (98.4)
*1 : In case it is necessary to indicate the air fl ow volume in (l/s), the value in (m
3
/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*2 : If the EUROVENT Certifi ed models can be operated under the “extra-low” temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230 V shall be used.
*3 : Network Impedance shall be applicable for EUROPE and CHINA models.
*4
:
The annual consumption is calculated by multiplying the input power at 230 V (400 V) by an average of 500 hours per year in cooling mode.
*5 : EER and COP classification is at 230 V (400 V) only in accordance with EU directive 2002/31/EC.
*6 : SEER and SCOP classification is at 230V(400V) only in accordance with EN-14825. For heating, SCOP indicates the value of only Average heating season,
Other fiche data indicates in an attached sheet.
SM830211-07̲PAC-i.indb 127 SM830211-07̲PAC-i.indb 127 2013/09/17 22:46:12 2013/09/17 22:46:12