Panasonic U-100PEY1E5, Technical Data & Service Manual, Page: 336 / 739

1
1-326
(1) Press both
(2) Select CODE No. with
(3) Change DATA with
(4) Press
* DATA is memorized in the RCU. (DATA setting will not be changed even when the power is turned off.)
* Make sure to set [Normal] for RCU. CK.
. Finally, press .
(TIMER) buttons.
( ) buttons.
and buttons on the remote controller for more than 4 seconds together.
Connecting 2 remote controllers
to control 1 indoor unit
Remote controller setting mode
Connecting 2 remote controllers to control a
simultaneous-operation multi system
To set the remote controller main/sub setting or change the sensor, follow the steps below.
/
U1 U2
1 2
1 2
1 2
1 2
Optional
Indoor unit
Ground
Ground
Outdoor unit
Optional
Remote control wiring
Terminal board for
remote control wiring
U1 U2 U1 U2
1 2
1 2
1 2
1 2
1 2
Remote controller
(main)
Optional
Indoor unit 1 Indoor unit 2
Ground
Ground
Ground
Outdoor unit
Optional
Remote control
communication
wiring
Terminal board for
remote control
wiring
Inter-unit
control wiring
Terminal board for
remote control
wiring
Remote controller
(sub)
Remote controller
(main)
Remote controller
(sub)
/
CODE
ITEM
ITEM
DATA
RCU. Main/Sub Sub Main
Clock display 24 hours 12 hours (AM/PM)
RCU. CK RCU. CK Normal
Room temperature sensor Main unit RCU
SM830211-07̲PAC-i.indb 326 SM830211-07̲PAC-i.indb 326 2013/09/17 22:48:05 2013/09/17 22:48:05