No-protocol Connection
ZW User's Manual
233
6
Commun
ication
s with Exte
rnal De
vi
ces
Setting the output format
Explorer pane
: [System] (double-click)
Edit pane
: [Data output setting] icon (
)
Item
Setting item
Description
Range
Data output set-
tings
Output data type
Select the output format.
ASCII, Binary
(default value: ASCII)
Digits of integer
Select the number of digits in the integer
part.
1 to 5 [digits]
(default value: 5 digits)
Digits of decimal
Select the number of digits in the fractional
part.
0 to 6 [digits]
(default value: 6 digits)
Zero suprression
Select whether or not to suppress leading
zeros.
ON/OFF
(default value: ON)
Field separator
Select the type of field separator.
OFF, comma, tab, space, CR, LF, CR+LF,
semicolon
(default value: OFF)
Record separator
Select the type of record separator.
OFF, comma, tab, space, CR, LF, CR+LF,
semicolon
(default value: OFF)
The output format can also be set by the operating keys on the Sensor Controller.
Setting Serial Data Output p.354
Note
Summary of Contents for ZW-C1*AT
