Omron ZW-C1*AT, User Manual

Page: 148 / 450

Parallel I/O connection
146
ZW User's Manual
Setting Operation at Judgment Output
Set the hysteresis width of the judgment upper/lower limit values and judgment output timing.
3-6 Setting Threshold Value p.68
Item Setting item Setting value Description
Judgment
output Hysteresis width 0 to 99.9999mm Sets the hysteresis value (difference between operating point and
recovery point) of the judgment upper/lower limit values when HIGH/
PASS/LOW judgment is unstable near the boundary.
Timer mode OFF (default value) Outputs the judgment as soon as the judgment result has been applied.
Off Delay Delays the falling edge of the PASS output by the value set at [Timer
Duration] after the judgment result has been applied.
On Delay Delays the rising edge of the PASS output by the value set at [Timer
Duration] after the judgment result has been applied.
O N
OFF
O N
OFF
O N
OFF
HIGH threshold
v al u e
Meas u red v al u e
LO W threshold
v al u e
HIGH o u tp u t
PASS o u tp u t
LO W o u tp u t
Hysteresis
(hysteresis w idth)
Action point
Ret
u rn point
HIGH threshold
v al u e
Meas u red v al u e
LO W threshold
v al u e
O N
OFF
O N
OFF
O
N
OFF
HIGH o u tp u t
PASS o u tp u t
LO W o u tp u t
HIGH threshold
v al u e
Meas u red v al u e
LO W threshold
v al u e
O N
OFF
O N
OFF
O
N
OFF
HIGH o u tp u t
PASS o u tp u t
LO W o u tp u t
: Timer time
HIGH threshold
v al u e
Meas u red v al u e
LO W threshold
v al u e
O N
OFF
O N
OFF
O
N
OFF
HIGH o u tp u t
PASS o u tp u t
LO W o u tp u t
: Timer time