Setting the Banks
326
ZW User's Manual
9-9 Setting the Banks
Switching Banks
As an example, here is an explanation of the procedure for setting BANK2.
Operating procedure
Steps
Key operation
Display
Description
1
Press and hold the key for two seconds to enter the FUN
mode.
2
Press the
/
key to select BANK, then press the
key.
3
Press the
/
key to select BK.CHG, then press the
key.
4
Select BANK2 for the bank number.
The current setting value is displayed on the sub-display.
Press
/
key to enter editing mode and the sub-display blinks.
Select "BANK2" and press the
key.
5
Press and hold the
key for two seconds to enter the RUN
mode.
Summary of Contents for ZW-C1*AT
