![background image](http://html1.mh-extra.com/html/omron/hd-1500-platform/hd-1500-platform_user-manual_743962232.webp)
This step concludes the procedure for Operator Panel removal. Proceed to the next steps to
replace the Operator Panel.
6
Insert the replacement Operator Panel into the mount bracket.
7
Reverse steps 1 to 4 to complete this procedure.
6-9-5
Wireless Antenna Replacement Procedure
Use the following procedure to remove and replace the wireless antenna located on the AMR.
Precautions for Correct Use
The position of the antenna is critical to correct operation. You must make sure to attach a new
antenna to the correct location etched on the base plate.
Additional Information
If the wireless antenna(s) has been relocated to the payload structure, its replacement proce-
dure will vary accordingly.
The following items are required for this procedure.
• A replacement wireless antenna.
• 2.5 mm hex key.
• 8 mm wrench or socket driver.
1
Use a 2.5 mm hex key to remove the 4 screws that fasten the wireless antenna cover to the
AMR and then remove the cover.
2
Gently pull the antenna connector off of the AMR adapter coupling. This is a friction fitting
which requires very little force.
3
Using a 2.5 mm hex key, remove the two retaining screws that fasten the antenna backing
plate to the compartment and then remove the assembly from the AMR.
6 Maintenance
6-26
HD-1500 Platform User's Manual (I645)
Summary of Contents for HD-1500 Platform
