4
Remove the adapter coupling from the antenna connector on the AMR using a 8 wrench or
socket driver.
5
Reverse steps 1 to 4 to complete this procedure.
6-9-6
AMR Charging Contact Replacement Procedure
Use the following procedure to replace worn AMR charging contacts.
Additional Information
Refer to
6-6-2 AMR Charging Contact Inspection
on page 6-10 for more information.
The following items are required for this procedure.
• 4 mm hex key
• Replacement AMR charging contacts.
• Torque wrench
• Locktite 222 thread lock compound or equivalent.
There are two sets of two charging contacts at the top and the bottom of the charging slot. This proce-
dure applies to both sets of charging contacts.
1
Remove the front skin. Refer to
Front Skin Removal and Replacement Procedure
for more information.
6 Maintenance
6-27
HD-1500 Platform User's Manual (I645)
6-9 Replacing Items
6
6-9-6
AMR Charging Contact Replacement Procedure
Summary of Contents for HD-1500 Platform
