manualshive.com logo in svg

Omron HD-1500 Platform, User Manual

The Omron HD-1500 Platform is a robust and reliable piece of equipment designed to facilitate heavy lifting operations. To fully understand its efficient functionality, we highly recommend referring to the comprehensive User Manual, which you can conveniently download for free from manualshive.com. Get acquainted with your machine's features and maximize its potential today!

Share
Download
background image

Precautions for Correct Use

• If you do not use appropriate fasteners, the Docking Target will move during the docking at-

tempts and cause docking and charging failures.

• The Power Supply Box has cooling vents at the top and bottom of the unit. Do not block

these areas.

The Docking Target's charging paddle is spring-loaded to accommodate slight variations in the floor
surface.
The following user supplied hardware is required to fasten the Power Supply Box.
• Six M12 bolts and fender washers are required if fastening the Power Supply Box to the floor.
• Six M10 bolts and washers are required if fastening the Power Supply Box to a wall.
The following hardware is required to fasten the Docking Target.
• At least 4 (max. 8) M8 button head cap screws and washers.
• Four Docking Target mounting brackets (supplied with the unit).

Charging Paddle Adjustments

The Docking Target charging paddle can be adjusted if alignment issues with the AMR charging con-
tacts occur. The vertical height and angle of the charging paddle can be adjusted with the following
setting screws.

Vertical

Height

Adjustment

Angle

Adjustment

Use a 6 mm hex key to adjust the charging paddle in the following manner.
• Turn the vertical height adjustment screw clockwise to increase the height of the charging paddle

and counterclockwise to decrease the height of the charging paddle.

• Turn the angle adjustment screw clockwise to lower the angle and counterclockwise to raise the an-

gle of the charging paddle.

Precautions for Correct Use

• After making adjustments to the charging paddle, carefully observe the AMR as it approaches

the Docking Target and be prepared to press an E-STOP button if alignment is not correct.

• Do not over-torque the charging paddle adjustment screws if they reach their limits.

3 Installation

3-5

HD-1500 Platform User's Manual (I645)

3-2 Charging Station Installation

3

3-2-2

 Mechanical Considerations

Summary of Contents for HD-1500 Platform

































































































































































































































































Reviews:

No comments

Related manuals for HD-1500 Platform

e-Gizmo THE BEAST Manual Manual preview
THE BEAST
Brand: e-Gizmo Pages: 47
Makeblock Codey Rocky User Manual preview
Codey Rocky
Brand: Makeblock Pages: 57
Quilt EZ Professional Butler Manual preview
Professional Butler
Brand: Quilt EZ Pages: 75
FISNAR I&J7000 Series Command List preview
I&J7000 Series
Brand: FISNAR Pages: 3
DFRobot HCR Instruction Manual preview
HCR
Brand: DFRobot Pages: 9
HikRobot ID3000 Series User Manual preview
ID3000 Series
Brand: HikRobot Pages: 101
Abicor Binzel CAT3 Operating Instructions Manual preview
CAT3
Brand: Abicor Binzel Pages: 88
Leju Robotics AELOS User Manual preview
AELOS
Brand: Leju Robotics Pages: 18
Leju Robotics Aelos 1S User Manual preview
Aelos 1S
Brand: Leju Robotics Pages: 42
Omron R6Y3 Series Installation Manual preview
R6Y3 Series
Brand: Omron Pages: 113
ABB IRB 4400/45 Product Specification preview
IRB 4400/45
Brand: ABB Pages: 68
ROBOTIQ EPick Manual preview
EPick
Brand: ROBOTIQ Pages: 2
ROBOTIQ CNC-RWC5-ES-UR-KIT Quick Start Manual preview
CNC-RWC5-ES-UR-KIT
Brand: ROBOTIQ Pages: 2
Tecnospiro ROSCAMAT-500 RH Operator'S Manual preview
ROSCAMAT-500 RH
Brand: Tecnospiro Pages: 43
Microbric Edison EdMat Instructions preview
Edison EdMat
Brand: Microbric Pages: 2
Microbric Ai2 How To Control preview
Ai2
Brand: Microbric Pages: 2
Microbric Spiderbot Assembly Instructions Manual preview
Spiderbot
Brand: Microbric Pages: 9
Milvus Robotics SEIT 100 User Manual preview
SEIT 100
Brand: Milvus Robotics Pages: 58

Brands by name

Popular brands

Load more brands