manualshive.com logo in svg

Omron HD-1500 Platform, User Manual

Share
Download
Omron HD-1500 Platform User Manual Download Page 159

4-12-6

Main Disconnect Switch

When the main disconnect switch is in OFF (horizontal) position, power is completely disconnected
from the internal battery. All systems in the AMR will not be energized in this position. Rotating the
main disconnect switch to the ON (vertical) position will establish a connection between the internal
battery and all AMR systems.

Precautions for Correct Use

The main disconnect switch should not be used as a frequent means of turning OFF the AMR.
Use the OFF button to turn OFF the AMR as a controlled shut-down method.

Refer to 

6-2 AMR Lock-out Tag-out Procedure

 on page 6-4 for more information.

4-12-7

Pendant Port

The pendant port is used to connect a handheld pendant to the AMR. This is typically used when driv-
ing the AMR manually. Disconnect the pendant from the pendant port during normal operation.

4 Operation

4-29

HD-1500 Platform User's Manual (I645)

4-12

 Operator Panel

4

4-12-6

 Main Disconnect Switch

Summary of Contents for HD-1500 Platform

































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands