OKM Hermes, User Manual, Page: 81 / 140

Chapter 5 Product Installation
Document Version V3.0 (01-11-2023) 53
5.10 Robot movement and storage
Pay attention to the following points when moving, storing and transporting
the robot.

When transporting the robot, fix it on a handling
equipment to prevent it from rolling over as it would
clamp hands or feet of the operators.
 When lifting the robot, hold it by hand to ensure balance.
The loss of balance may cause the robot to fall resulting
in personal injury and damage to the robot.
To reassemble the robot after long-term storage and reinstall its system for use,
conduct a test run and then start normal operation after confirming that there
is no abnormality.
Transport and store the robot according to the robot installation site and
environmental requirements.
If fog forms in the robot during transportation and storage, eliminate the
fogging before turning on the power.