OKM Hermes, User Manual, Page: 77 / 140

Chapter 5 Product Installation
Document Version V3.0 (01-11-2023) 49
Step 2
Place the emergency stop button box in a position that will allow easy
operation by users.
Figure 5-9 Schematic diagram of emergency stop device connection
5.8.3 Power connection
Hermes Robot has achieved integrated design without power supply box for
power connection, which is convenient for use.
Cable to be used: Power cable
The wiring steps are shown below.
Step 1
Take the power cable out of the accessories box. Install the aviation plug
end of the power cable at the "POWER" interface of the robot.
Step 2
Tighten the screw cap of the aviation plug clockwise.
Step 3
Plug the other end of the power cable into the 230 V a.c. socket.
Red foolproof sign marked upward
Emergency stop switch
component