OKM Hermes, User Manual, Page: 119 / 140

Chapter 6 Robot Operation
Document Version V3.0 (01-11-2023) 91
Figure 6-39 "LocationJ Array" information interface
Step 6
New Profile Array; Click "New Array" in "Profile Array", and the "New
Array" interface will pop up. Enter the array name and array length,
and click "OK", as shown in Figure 6-40.
Figure 6-40 New Profile Array
After completion, the "Profile Array" information will appear, and the motion
parameter information will be the default value, as shown in Figure 6-41.