Oki BV1250, Installation Manual, Page: 318 / 344

APPENDICES Oki BV1250 Installation Guide
Page 308 of 334 Revision 1.0
Appendix H:
Configuration Files Configuration Files Configuration Files Configuration Files
The BV1250 unit Ofdd.vho configuration files are stored as plain text
files and can be edited directly using a plain text editor on any computer
device. For experienced planning and installation personnel, this method
can be fast and efficient. Once files have been created, they can be
uploaded directly to IVG units using the FTP method discussed in
Appendix I: .
Once an Ofdd.vho file has been manually modified, the MCS unit
registration information will be no longer be synchronized. Therefore, it
is recommended that the modified
Ofdd.vho file not be reopened directly
using the MCS. If it is necessary to establish conformance with the MCS,
establish a LAN link with the unit. Next create a new unit using the MCS
Setup Wizard (Section 5.7), using the IP addressing information for the
unit. Finally, select the download option when configuring the unit
(Section 5.9.1) and download the configuration data directly from the
unit. The manually created settings will then appear in the MCS
configuration folders.
Also, when working directly with configuration files it is very important
to observe and comply with the directory structure used by the
Maintenance Console Software. Any change to this structure will cause
the MCS to fail.
The OFDD.VHO files for each group are located in the unit sub-
directories for each group. The Group directories are Chicago, Los