Oki BV1250, Installation Manual

Page: 42 / 344

NETWORK WORKSHEETS Oki BV1250 Installation Guide
Page 32 of 334 Revision 1.0
3.2.2 Network Units List Worksheet
Use the Network Units List Worksheet to record unit identifications and IP
addressing information for all units to be installed in the network.
This worksheet is designed for use as a master list of key unit information
and is useful in planning the deployment of units.
The seven fields are to be completed for each BV1250 unit installed in the
network. The information contained on this worksheet will be transferred to
individual unit setup worksheets discussed later in this chapter.
See sections 5.7.2 and 5.7.3 for Maintenance Console Software procedures
to configure this information in the BV1250 unit.
A reproduction master for this worksheet is included in Appendix J: of this
document.
This worksheet contains all of the information needed to initialize a
network’s BV1250 units using the Maintenance Console Software
Unit Setup Wizard.
If this setup information is then uploaded to each unit and the units
rebooted, it is possible to perform all remaining configuration tasks
remotely using, the Maintenance Console Software.