Oki BV1250, Installation Manual, Page: 340 / 344

APPENDICES Oki BV1250 Installation Guide
Page 330 of 334 Revision 1.0
FXO Unit Setup Worksheet
(Back)
SPEED DIAL
80
Forwarding No. 01
Forwarding No. 02
Forwarding No. 03
Forwarding No. 04
Forwarding No. 05
See Extension Worksheet FX-E
INTERFACE TIMING Tone Detect Parameters Dial Tone (Disabled)
Disconnection (Disabled)
Busy Tone (Disabled)
Forced Disconnect: (
0
)
Auto Drop Time: (
5
)
DISA Response: ( 3 )
VOICE MODE Protocol:
( H.323 )
Qual/Effic
Payload: ( 80 byte )
Qual/Effic Bandwidth:
( 12.0K bps )
Primary CODEC
(G729)
Secondary
CODEC
Port 1
Port 2
Port 3
Port 4
NETWORK Regular Timing: ( 0 ) Error Detect Timing: ( 3 )
Disconnect on Errors: ( 10 ) Reconnect on Errors: ( 1 )
CALL CONTROL Signaling Port: (
1720
) H.245 Start port: (
1721
)
RTP Start Port: (
5004
) Connect Time: (
30 seconds
)
DNS SETUP
SNMP SETUP See Common Configuration Worksheet
GATEKEEPER
RECOVERY DELAY Max. Receive Buffer (1920 ms)
Start Recovery (200 ms)
End Recovery (30 ms)
OTHER Fan Fault Blocking/Non-Blocking
(Blocking)
a-law/m-law Flag (m-law)
80
When called from PSTN to units configured with DIL, these numbers are automatically dialed.