Oki BV1250, Installation Manual

Page: 140 / 344

FXO WORKSHEETS Oki BV1250 Installation Guide
Page 130 of 334 Revision 1.0
Recovery Delay
The BV1250 Recovery Delay feature controls a secondary Jitter buffer that
is activated dynamically when enabled. This feature allows the unit to
recover from network delays by temporarily storing voice data in a Jitter
(recovery) buffer. In the event of a network delay, the stored voice data is
transmitted, assuring an uninterrupted conversation.
Several configuration parameters can be configured for this feature.
Maximum Receive Buffer Size
Record the maximum allowable size of the recovery buffer. In most
cases, the default size (1920 ms) will provide the best results.
Start Recovery
Record the duration of the network interruption after which voice data
should be discarded from the recovery buffer. In most cases, the
default value (200 ms) will provide the best results.
End Recovery
Record the period during which packets continue to be discarded and
after which packets will no longer be discarded. In most cases, the
default value (30 ms) will provide the best results.