Oki BV1250, Installation Manual, Page: 169 / 344

Oki BV1250 Installation Guide PHYSICAL INSTALLATION
Revision 1.0 Page 159 of 334
Figure 4-18: AP connector preparation
3. Once the cores have been inserted, press the top of the connector to secure the
wires in place.
Repeat these steps for each port to be used (maximum of 4) and proceed to
the procedure, "To connect the analog interface cables" below.
To connect the analog interface cables:
1. Select a port for the connection and verify that the port number will be used for
a telephone extension.
2. Connect the prepared cable connector to a TEL connector (1 through 4) located
at the front of the BV1250.
3. Connect the other connectorized end of the cable to a terminal block or other
telephony interface.
T e l e p h o n e
Terminal Block
D D K / R J 1 1
Figure 4-19: Connecting a rack mounted unit
T e l e p h o n e
M o d u l a r B o x
R J 1 1
D D K / R J 1 1
Figure 4-20: Connecting a desktop mounted unit