Oki BV1250, Installation Manual

Page: 89 / 344

Oki BV1250 Installation Guide E&M WORKSHEETS
Revision 1.0 Page 79 of 334
Tone
Use the Tone Section of the worksheet to record the unit tone configuration.
Although the BV1250 allows for the creation and installation of custom
tone sets, this worksheet section is designed to use the BV1250 unit’s preset
Zone tone configurations.
Zone (VHUB_AREA)
Use the Zone field to record the tone set to be used when setting-up a
BV1250 unit. The preset tone configurations are:
•
Japan
•
Italy
•
US (default)
•
Sweden
•
Germany
•
Norway
•
UK (United Kingdom)
•
France
•
Spain
•
Australia
•
Swiss
•
New Zealand
•
Austria
In the sample, the Zone is recorded using the default value, US.
Custom parameters can be used to create special tone sets for a
BV1250 unit. See Appendix E: for details.
Numbering
Use the Numbering section of the worksheet to record the access number
(e.g. extension and Access Codes) for the BV1250 being installed.
The information recorded is necessary to setup phone numbers for a
BV1250 network. The numbers configured in this manner may be setup to
emulate familiar PSTN numbering plans and/or conform to existing PBX
numbering systems. Behind the scenes, the numbering plan is mapped to
the network IP addressing by the Gatekeeper or the internal and/or external
DNS system. The telephone number used in processing a BV1250 unit call
varies based upon the specific network configuration. Below is a general
discussion of E&M numbering. See Appendix C: for a complete discussion
with examples.
Although a BV1250-E&M unit must be provided with an IVG Office Code
that is unique to the unit, this number is used internally only and does not
become part of the network telephone numbering plan. Instead, the PBX