Notifier UniNet 2000, Installation, Operation, And Administration Manual

Page: 57 / 200

57
The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
When used with the workstation history database, the Event Display contains nine columns of information (six are
shown above because of screen width). These nine columns are:
• Date/Time (Rec)(Actual) : This field displays either the time that the event was received by the worksta-
tion, or the actual time the event occurred. The field can be alternated between received and actual time
using the button in the lower left hand corner of the main screen. The format is MM/DD/YY HH:MM:SS
(AM/PM).
• Site : This field gives the Site ID for the site from which the event was generated. Keep in mind that all
local sites use the naming convention Local XX , where XX is the server number that monitors that location.
• Device ID : This field gives the device ID of the device that generated the event.
• Status : The Status field gives the status of the device or the nature of the event. Status is where the event
is annunciated in plain text terms.
• Value : This field indicates the value associated with an event. 0 = Off, 255 = ON.
• Device Type : This field gives the device type in accordance with the configured device type inside the
workstation software.
• Event / Msg Type : This indicates the event type in accordance with the event types used in filtering
events. These types are less specific than the device type, but more specific than the color codes.
• Ack : This field contains a checkbox. If the checkbox is checked, then the event was acknowledged by an
operator. If the box is unchecked, it was not acknowledged.
• Text Messages : This field contains text messages associated with an event. System events often contain
informational text in this field. This is also the field where text entered by an operator as an operator
response will appear.
Figure 2-25: The Event Display
NOTE: For more information on the History Manager application including filter application and report
scheduling and generation, refer to the System Utilities manual.