Notifier UniNet 2000, Installation, Operation, And Administration Manual

Page: 137 / 200

137
The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
4.8: Pelco Plug-In Application
4.8.1 Pelco CCTV NION Plug-In
This plug-in application (Pelco.exe and .cfg) controls the Pelco CCTV NION through the interface shown below:
The Pelco CCTV NION Plug-In controls the Pan/Tilt/Zoom functions available via the Pelco CCTV NION and
allows full software control of zoom, focus, and iris open/close.
Camera and Monitor frames - combo boxes which allow the user to select which camera/monitor to access. The
Pelco video Plug-In allows the switching of any available camera to any available monitor. By selecting Config-
ure , Set Camera Title , it also allows the user to edit a camera title for each camera and modify the display
properties (Time/Date Display, Camera Number Display, Camera Title Display, Text Color, Display Position).
Assign Camera 0001 to Monitor 0001 - After selecting the desired camera and monitor, click on this button to
assign the chosen camera to the monitor.
Joystick - The Joystick controls the pan and tilt capabilities of a Pelco CCTV camera. To use the joystick, click on
the joystick and move the mouse to push it in the desired direction. As long as the mouse button is depressed, the
joystick will move towards the cursor, even if the cursor moves past the boundaries of the control. The camera will
pan faster the farther the joystick is moved away from the center. Releasing the mouse button causes the joystick to
re-center, stopping the camera's movement.
Zoom/Focus/Iris Controls - The Zoom/Focus/Iris controls allow access to these functions of the Pelco CCTV
camera. Click and hold on the "+" or "-" buttons to change the zoom, focus, or iris.
All Stop - Stops all running ptz movements; functions as a safety feature.
Configure
pull-down
m e n u
Joystick
Command
Buttons
Zoom/Focus/Iris
Controls
Figure 4-10: Pelco CCTV NION Plug-In Interface
4.8