Notifier UniNet 2000, Installation, Operation, And Administration Manual

Page: 140 / 200

140 The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
4.8.3 UniLogic Applications for the Pelco CCTV NION Plug-In
The Pelco CCTV NION can activate a preset, pattern or sequence based on any selected event through the use of
UniLogic.
To activate a preset from UniLogic, manually create two icons in the workstation, one with device ID “S,” followed
by a 4-digit camera number and 3-digit monitor number (i.e., S0012001), and the other with a device ID of “PR,”
followed by a 3-digit preset number (i.e., PR001).
To activate a pattern from UniLogic, first manually create two icons in the workstation, one with device ID “S,”
followed by a 4-digit camera number and 3-digit monitor number (i.e., S0012001), and the other with a device
ID of “PT,” followed by a 3-digit pattern number (PT001).
To activate a sequence from UniLogic, manually create two icons in the workstation, one with device ID “S,”
followed by a 4-digit camera number and 3-digit monitor number (i.e., S0012001), and the other with a device
ID of “SEQ,” followed by a 3-digit sequence number (i.e., SEQ001).
Device Type Key :
S - switch
PR - preset
PT - pattern
SEQ - sequence
NOTE: For each of the three features, both device ID’s should be a camera
device type with a camera symbol. UniLogic will first activate the switch,
followed by the preset, pattern, or sequence, respectively.