Notifier UniNet 2000, Installation, Operation, And Administration Manual

Page: 29 / 200

29
The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
1.3.2 The System Setup Folder
The System Setup Folder consists of six tabs that are used to configure various elements of the software. The
System Setup Folder is opened from the top menu bar by selecting Workstation Configuration, Options .
General Tab
The General Tab contains options and settings that apply to various parts of the workstation software. Any time
changes are made, it is necessary to click Apply or OK for changes to take effect. Clicking on OK will close the
tab. Clicking Apply will save the changes for the current tab and another tab may be edited. Clicking Cancel
will discard any changes made.
Figure 1-18: System Options : General Tab
2. Give the server a unique Server Number. Specify the Network Name of the computer on which the server
resides, or enter the computer's static IP address. If applicable, select the number of the server it either
backs up or is backed up by.
3. When all information has been entered, click OK , then select Alarm Servers, Update All to update the
settings.
NOTE: Update Selected will only update the highlighted Alarm Server entry. Update All will update all
Alarm Server entries. Refresh Display will reset the Socket Connections form to reflect any configuration
changes made. Drop Selected will disconnect the highlighted server from the network, and a status message
will be displayed on the screen. Drop All will disconnect all servers from the network.
Figure 1-17: New Alarm Server Connection