Notifier UniNet 2000, Installation, Operation, And Administration Manual

Page: 142 / 200

142 The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
AutoIris - Toggles between activating/deactivating the AutoIris feature. This automatically adjusts the brightness
depending on the angle of the camera.
Four Speed Receiver - This checkbox should be selected if the currently selected PTZ unit uses a four-speed
receiver. The box should not be checked if the receiver has 255 speeds.
Tour - The Tour feature enables the user to utilize a tour, which is programmed via the Vicon keyboard. Select
the tour number, then click
Run tour _ on monitor _
. (The underscores represent the desired tour and monitor
numbers.)
Preset - To set a camera angle, adjust ptz to the desired view, choose a Preset number in the combo box, and
click Set . To select a preset, click Goto .
As an additional feature, the user can set a password on the RS-232 port. If this option is implemented, the pass-
word will have to be set in the plug-in. This is accessed by selecting Configure , Set Switcher Password .
NOTE: The password set in the plug-in must match the host port configuration
password set via the Vicon monitor.