Notifier UniNet 2000, Installation, Operation, And Administration Manual

Page: 189 / 200

189
The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
Each event within the system has a corresponding color. This color coding is used
when displaying the event on-screen, when viewing events in history manager, and
various other applications throughout the software.
The table on this page shows each event type and its corresponding color. Keep in
mind that this lists off-normal events only. Each off-normal event has a corre-
sponding normal event. Every Normal discrete event within the workstation is
displayed with the color gray.
Figure E-2: Event
Color Coding
Red Fire Alarm
Fire Alarm(Non Latching)
Alarm
Agent Release
Tamper Switch Activated
Agent Release Abort
Door Ajar
Forced Entry
Recent Alarm
Panic Alarm
Supervisory Alarm
Card REJECTED - Invalid Time
Invalid Facility Code
Card Not Active
Card REJECTED - Invalid Reader
Guard Tour Interrupted
Card REJECTED - Invalid Card
Card REJECTED - Door Locked
Extremely Low Value
Extremely High Value
Addressable Input On
Restart
Gray Offline
Blue Security Alarm
Audibles Silenced
Off-Normal Condition
Bad Address
Device Disabled
Addressable Output On
Device Non-Monitoring
Armed
Disarmed
Armed Away Mode
Armed Stay Mode
Armed Instant
Armed Maximum
Test Mode Activated
Manual Disable
Schedule Disable
Manual Output On
Schedule Output On
Off Normal
Color
Off-Normal Event
Yellow Pre-Alarm
Verifying for Fire Alarm
Alert Condition
Soft Anti-Passback Warning
Card REJECTED - Inv. Antipassb
No Entry After Unlock
Extended Unlock Reminder
Locked
Unlocked
Point Inactive
Fault Condition
Temperature Alarm
Zone Trouble
Ground Fault
AC Power Failure
Trouble
Loop Trouble
Very Low Value
Very High Value
High Value
Low Value
Cover Open
Out of Paper
Transmission Trouble
Fuse Failure
Short Circuit
Open Circuit
Position Alarm
Video Signal Loss
Unlock
Program Entry
Program Exit
White Card ACCEPTED
Request to Exit
Guard Tour Read