Notifier UniNet 2000, Installation, Operation, And Administration Manual

Page: 20 / 200

20 The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
NOTE: Use only wire for power limited systems.
Power limited wire runs use type FPLR, FPLP, FPL
or equivalent cabling per NEC 760.
Connecting the Computer Peripherals
1) Connect AC power to the AC power connector.
2) Connect the keyboard to the keyboard adapter.
3) Connect the mouse to the PS/2 mouse port.
4) Connect the monitor cable to the monitor port.
5) Connect the Echelon PCLTA-20 to the network using the terminal screws (This is only available on comput-
ers with the Local Area Server installed).
6) Connect the software key to LPT-1.
7) For the Event Printer option, connect the Event Printer to the workstation at COM Port 1.
8) For the Graphic Printer option, connect the Graphic Printer into the workstation key at LPT-1.
Figure 1-6: Intel Pentium II Computer and Peripheral Connections
NOTE: The front power switch of the PC has been disabled at the factory by removing the connector
from J8G3 and placing a jumper across pins 1 and 2 of J8G3 on the motherboard.
IMPORTANT: Once the Workstation has been assembled and pow-
ered on, Windows Settings must be configured. Since these settings
affect multiple Multi-Net Manager applications, they are detailed in
a separate manual entitled System Utilities. For the Workstation to
function properly, these instructions must be followed.
AC Power Connector
Workstation
Supervisor
RJ-45 Ethernet
Connection
Monitor Port
PS/2 Mouse Port
Keyboard
Speaker
Connection
COM Port 1
COM Port 2
L P T - 1
USB Ports