Notifier UniNet 2000, Installation, Operation, And Administration Manual

Page: 19 / 200

19
The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
COM Ports 1 and
2
LPT Port
Software Key
Connection
Echelon PCLTA-20
Monitor
Port
AC Power
Connector
Workstation
Supervisor
RJ-45 Ethernet
Connection
COM Ports 3
and 4
Audio
Not
Used
Mouse/Keyboard
Port
USB Ports 1 and
2
NOTE: Use only wire for power limited systems.
Power limited wire runs use type FPLR, FPLP, FPL
or equivalent cabling per NEC 760.
Connecting the Computer Peripherals
1) Connect AC power to the AC power connector.
2) Connect the keyboard to the mouse/keyboard port.
3) Connect the mouse to the PS/2 mouse/keyboard port.
4) Connect the monitor cable to the monitor port.
5) Connect the Echelon PCLTA-20 to the network using the terminal screws (This is only available on comput-
ers with the Local Area Server installed).
6) Connect the software key to LPT-1.
7) For the Event Printer option, connect the Event Printer to the workstation at COM Port 1.
8) For the Graphic Printer option, connect the Graphic Printer into the workstation key at LPT-1.
NOTE: The power switch on the back of the UnInet 2000 Intel Pentium III computer has
been disabled and permanently fixed in the ON position. A functional power supply
switch is located behind the locking front door.
Figure 1-5: Intel Pentium III Rack Mountable Computer
and Peripheral Connections