Notifier UniNet 2000, Installation, Operation, And Administration Manual

Page: 138 / 200

138 The Workstation Installation/Operation Manual Version 2 Document 51540 Rev. B1 4/8/02
Tour - The Tour feature enables the user to utilize a tour which, like a
macro, is programmed via the Pelco keyboard. Select the tour number,
then click Start to begin, Stop to end, and Close to exit.
Macro - The Macro feature of the plug-in allows the user to play back a
macro recorded via the Pelco keyboard. Simply select the macro to be
implemented, click on Start to begin, Stop to end, and Close to exit.
NOTE: The Macro feature only functions with certain models of
Pelco instrumentation. For more detailed information on the
use of macros, consult the Pelco owner’s manual.
NOTE: The Tour feature only functions with certain models of
Pelco instrumentation. For more detailed information on the
use of tours, consult the Pelco owner’s manual.
Figure 4-11: The Sequence Dialog
4.8.2 Command Buttons
Sequences - To implement a sequence programmed via the Pelco monitor, click on
Seq
, select the sequence
number, and click on
Start
to start the sequence,
Stop
to stop, and
Hold
to pause. Once the sequence is
paused, the user can click on
Prev
or
Next
to go to the previous or next sequence. To exit this feature, click on
Cancel
.
Figure 4-12: Playing a
Macro
Figure 4-13: Playing a
Macro