NEC Express 5800 120Eg, User Manual

Page: 38 / 292

120Eg User Guide - System Overview
1 - 16
Standard Features
High performance Expandability
■
Intel

Xeon

Processor
■
DDR333 integrated SDRAM
■
High-speed 1000BASE-T/100BASE-TX/
10BASE-T interface (1000Mbps/100Mbps/
10Mbps supported)
■
High-speed disk access
(Two serial ATA channels)
■
Wide variety of optional I/O slots
Two 64-bit, 66MHz PCI-X slots
Two 32-bit, 33MHz PCI slot
■
Large memory of up to 4 GB
■
Four non hot swap hard disk drive bays (SCSI
or S-ATA)
■
Four hot swap hard disk drive bays (S-ATA)
■
Six hot swap hard disk drive bays (SCSI)
■
Remote power-on feature
■
Up to two Intel Xeon processors
■
USB interface (A USB-support driver is
required.)
■
Convert to rack-mount type (Rack Conversion
Kit is required.)
High-reliability Many Available Features
■
Memory monitoring feature (single-bit error
correction/double-bit error detection)
■
CPU/memory degradation feature (logical
isolation of a failed device)
■
Temperature detection
■
Error notification
■
Internal fan monitoring feature
■
Internal voltage monitoring feature
■
BIOS password feature
■
Security feature (security lock)
■
Disk array (option)
■
Hot Swap S-ATA or SCSI HDD (optional)
■
Redundant hot swap power supply (optional)
■
Graphic accelerator "RAGE XL" support
■
El Torito Bootable CD-ROM (no emulation
mode) format support
■
POWER switch mask
■
Software power-off
■
Remote power-on feature
■
AC-LINK feature
Self-diagnosis
■
Power On Self-Test (POST)
■
Test and Diagnosis
Management Utilities Maintenance Features
■
NEC ESMPRO
■
Memory dump feature using the DUMP (NMI)
switch
Power Saving Feature Easy and Fine Setup
■
Sleep feature
(available for Windows 20003/2000)
■
NEC EXPRESSBUILDER (system setup
utility)
■
SETUP (BIOS setup utility)
■
Configuration Diskette Creator