120Eg User Guide - Configuring Your System
3 - 24
Notes:
■
Before adding a new drive to an array, back up any data con-
tained on the new drive. Otherwise, all data will be lost.
■
If you stop the Build or Clear process on a RAID1 from ACU,
you can only restart it from Adaptec Storage Manager
-
Browser Edition. (See SATA HostRAID Adaptec Storage
Manager Browser Edition User's Guide included in the NEC
Express Builder’s online documentation for details.)
■
A RAID1 created using the Quick Init option may return
some data miscompares if you later run a consistency
check. This is normal and is not a cause for concern.
■
The ACU allows you to use drives of different sizes in a
RAID1. During a build operation however, only the smaller
drive can be selected as the source or first drive.
■
When migrating from single volume to RAID0, migrating
from a larger drive to a smaller drive is allowed. However the
destination drive must be at least half the capacity of the
source drive.
■
Adaptec does not recommend that you migrate or build an
array on Windows dynamic disks (volumes), as it will result
in data loss.
5.
Select a source drive from the Select Source Drive list box and press
Enter
.
6.
When you are finished, press
Done
.
Summary of Contents for Express 5800 120Eg
