NEC Express 5800 120Eg, User Manual

Page: 257 / 292

120Eg User Guide - Appendix D
D - 32
changes due to adding memory. Verify the size of the empty
space in the debugging information (memory dump) write
destination drive.
6. Click [Performance Options].
7. Click [Change] on the [Virtual Memory] dialog box.
8. Modify [Initial Size] in the [Paging File Size for Selected Drive] box to the
value larger than [Recommended Size], and click [Specify].
Caution
■
Be sure to create memory dump with the size described
above on the OS partition. If [Default Size] of the paging file
is specified to the value smaller than "Recommended" value,
the correct debug information (memory dump) may not be
collected.
■
For more information on "Recommended" value, see
"Partition Size to be Created" described earlier.
■
To prepare for the situation when any trouble occurred, we
recommend you to press dump switch to confirm that the
dump will be collected normally in advance.
■
In case the memory is expanded, re-specify the paging file to
suit the new memory size.
9. Click [OK].
The message to restart the system may appear according to the modified
specification. In such case, follow the message to restart the system.
Windows 2000 Dr. Watson
Windows 2000 Dr. Watson is a debugger for application errors. If any application error
is detected,
Dr. Watson diagnoses the server and logs diagnostic information (log). Follow the
procedure below and specify Dr. Watson to collect diagnostic information.
1. Click [Run] on Start menu.
2. Type "drwtsn32.exe" in the [Open] box, and click [OK].
The [Dr. Watson for Windows 2000] dialog box appears.
3. Specify the location to store the diagnostic information in the [Log File Path]
box.
The diagnostic information will be stored with the file name
"DRWTSN32.LOG".