NEC Express 5800 120Eg, User Manual

Page: 236 / 292

120Eg User Guide - Appendix D
D - 11
Notes:
■
If you click [Cancel] in [Basic Information] screen, the screen
will go back to select the Setup File. [Cancel] exists only in
[Basic Information] screen.
■
If you click [OK] in [Role of Computer] screen, the setup
automatically selects default value for the later specification
to continue the installation.
When all the specification has completed, the system reboots automatically.
9. Copy the modules for the optional mass storage driver.
If you want to install the optional mass storage driver, insert the floppy disk
attached to mass storage driver into the floppy disk drive and follow the
message to operate the installation.
10. Follow the message and take NEC EXPRESSBUILDER CD-ROM and
Configuration Diskette out of the CD-ROM drive and floppy disk drive, and
insert Windows Server 2003 CD-ROM into the CD-ROM drive.
[Software License Agreement] screen appears.
11. Read the contents carefully and click [I agree.] or press F8 if you do agree. If
you do not agree, click [I disagree] or press F3 .
Caution
■
If you do not agree to this agreement, the setup terminates
and Windows Server 2003 will not be installed.
■
If "NetWare Gateway (and Client) Service" is specified to
install, the window to specify the details of "NetWare Gate-
way (and Client) Service" pops up on the first logon. Specify
the appropriate value.
Now the Setup using Express Setup has completed.
Installing and Setting Device Drivers
Follow these steps to install and configure the device drivers.
PROSet
PROSet is a utility that confirms the function of network contained in network driver.
Utilizing PROSet enables the following items:
■
Confirm detailed information of the adapter.
■
Diagnose loop back test, packet transmission test and so on.
■
Setup of teaming.