NEC Express 5800 120Eg, User Manual

Page: 90 / 292

120Eg User Guide - Configuring Your System
3 - 18
Exit Menu
You can make the following selections on the Exit Menu. Select an option using the up
or down arrow keys, then press <Enter> to execute the option. Pressing <Esc> does
not exit this menu. You must select one of the items from the menu or menu bar to exit.
Table 3 - 21: Exit Menu
Choices Description
Save Changes and Exit Exit after writing all modified Setup item values to NVRAM.
F10 key can be used for this operation.
Discard Changes and Exit Exit leaving NVRAM unmodified. User is prompted if any of
the setup fields were modified.
Esc key can be used for this operation.
Discard Changes Read previous values of all Setup items from NVRAM.
Load Setup Defaults Load default values for all SETUP items.
F5 key can be used for this operation.
Load Custom Default Load the custom default values previously saved with the
option below.
Save Custom Defaults Save the current settings as custom defaults.