NEC Express 5800 120Eg, User Manual

Page: 210 / 292

120Eg User Guide - Problem Solving
5 - 42
0005 CMOS Checksum Bad
0008 Unlock Keyboard
0009 PS2 Keyboard not found
000A KBC BAT Test failed
000B CMOS memory size different
000C RAM R/W test failed
000E A: Drive Error
000F B: Drive Error
0010 Floppy Controller Failure
0012 CMOS time not set
0014 PS2 Mouse not found
0040 Refresh timer test failed
0041 Display memory test failed
0042 CMOS Display Type Wrong
0043 ~<INS> Pressed
0044 DMA Controller Error
0045 DMA-1 Error
0046 DMA-2 Error
0047 Unknown BIOS error. Error code = 147 (this is really a PMM_MEM_ALLOC_ERR)
0048 Password check failed
0049 Unknown BIOS error. Error code = 149 (this is really SEGMENT_REG_ERR)
004A Unknown BIOS error. Error code = 14A (this is really ADM_MODULE_ERR)
004B Unknown BIOS error. Error code = 14B (this is really LANGUAGE_MODULE_ERR)
004C Keyboard/Interface Error
004D Primary Master Hard Disk Error
004E Primary Slave Hard Disk Error
004F Secondary Master Hard Disk Error
0050 Secondary Slave Hard Disk Error
0055 Primary Master Drive - ATAPI Incompatible
0056 Primary Slave Drive - ATAPI Incompatible
0057 Secondary Master Drive - ATAPI Incompatible
0058 Secondary Slave Drive - ATAPI Incompatible
0059 Third Master Device Error
005B Fourth Master Device Error
005D S.M.A.R.T. Status BAD, Backup and Replace
005E Password check failed
0120 Thermal Trip Failure
0146 Insufficient Memory to Shadow PCI ROM
0150 BSP Processor failed BIST
0160 Processor missing microcode – P0
0161 Processor missing microcode – P1
0180 BIOS does not support current stepping – P0
0181 BIOS does not support current stepping – P1
0192 L2 cache size mismatch
Table 5 - 3: POST Error Messages (Continued)
Error Code Error Message