NEC Express 5800 120Eg, User Manual

Page: 83 / 292

120Eg User Guide - Configuring Your System
3 - 11
Security Menu
Note:
Enabling the Supervisor Password field requires a pass-
word for entering Setup. The passwords are not case sensitive .
Table 3 - 14: Security Menu
Feature Choices or
Display Only Description Your Setting
Administrator
Password is
Installed
Not Installed
Indicates whether the
administrator password is set
(display only).
User Password is Installed
Not Installed
Indicates whether the user
password is set (view only).
Set Administrator
Password
Up to 7
alphanumeric
characters
Press Enter to display the
administrator password entry
screen. With the administrator
password, all SETUP menus
are available for access. This
option is available only when
you log into the SETUP utility
with the administrator
password.
Set User Password Up to 7
alphanumeric
characters
Press Enter to display the user
password entry screen. With a
user password, only certain
menus are accessible. This
option is available only if the
Administrator Password is set.
User Access Level No Access
View Only
Limited
Full Access
"No Access" prevents user
access to the SETUP utility.
"View Only" allows access to
the SETUP utility but no
parameters are changeable.
"Limited" allows only limited
fields to be changed.
Clear User
Password
Press Enter Running this menu immediately
clears the user password.
Fixed Disk Boot
Sector Protect
Disabled
Enabled
Will write protect the boot
sector of the hard drive to
prevent viruses from corrupting
the drive under DOS if set to
Enabled.
Password On Boot Disabled
Enabled
Specify whether to request a
password entry at boot-up.
Administrator password setup
is required.
Only available if supervisor
password is set.
Secure Mode Timer 1 , 2, 5, 10, 20, 60,
120 minutes
Set the period from no input
from the keyboard or mouse to
the point at which the system
enters into the secure mode.