NEC Express 5800 120Eg, User Manual

Page: 112 / 292

120Eg User Guide - Upgrading Your System
4 - 10
Note:
If the drive comes with drive rails, do not use them.
Remove any rails already attached.
Caution
When installing mounting rails on a removable device always
use the screws that come with the device. Using longer screws
or those of different diameter may cause damage to the device.
Note:
When installing a double-height device, use the DLT
device rails that come with the server.
Figure 4 - 7: Attaching the Device Mounting Rails
8. Install the media device into the bay as follows:
■
Move any cables in the bay out of the way.
■
Align the rails on the media device with the support guides in the bay.
■
Slide the device into the bay until the slide rails are flush with the system.
Note:
Make sure that the cables are not caught while the
5.25-inch device is pushed into the slot.