NEC Express 5800 120Eg, User Manual

Page: 85 / 292

120Eg User Guide - Configuring Your System
3 - 13
Server Menu
Table 3 - 15: Server Menu
Feature Choices or
Display Only Description Your Setting
System
Management
Select Submenu
Serial Console
Features
Select Submenu
Ecent Log
Configuration
Select Submenu
Assert NMI on
PERR
Disabled
Enabled
Sets support of PCI bus parity
error (PERR).
Assert NMI on
SERR
Disabled
Enabled
Sets support of PCI bus system
error (SERR).
Resume on AC
Power Loss
Stays Off
Last State
Power On
Sets the AC-LINK feature.
Determines the mode of
operation if a power loss
occurs.
FRB-2 Policy Retry on Next Boot
Disable FRB2 Timer
Selects action if the boot
processor will be disabled.
Late POST Timeout Disabled
5, 10, 15, 20
minutes
Selects time limit for searching
add-in card. The system will be
reset on timeout.
Hard Disk OS Boot
Timeout
Disabled
5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55,
60 minutes
Selects time limit for booting an
operating system installed in
the hard disk drive. The action
taken on timeout is determined
by the Fault Resilient Boot
Timer policy option.
PXE OS Boot
Timeout
Disabled
5, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55,
60 minutes
Selects time limit for booting an
operating system using PXE
boot. The action taken on
timeout is determined by the
OS Watchdog Timer policy
option.
OS Watchdog Timer
Policy
Always Reset
Retry 3 Times
This option controls the policy
upon PXE boot timeout.
If [Retry 3 times] is selected,
the system is reset after the
occurrence of timeout and OS
boot is retried up to three times.
The failure in the third boot
causes the system reboot.
If [Always Reset] is selected,
the system is reset after the
occurrence of timeout and OS
boot is retried repeatedly.
Platform Event
Filtering
Disabled
Enabled
Disables or enables triggers for
system sensor events.
Temperature
Sensor
Disabled
Enabled
Indicates whether the
temperature sensor monitoring
function is enabled or disabled.
Post Error Pause Disabled
Enabled
Indicates whether POST is
aborted once at the end of
POST if an error occurs during
the execution of POST.