NEC Express 5800 120Eg, User Manual

Page: 230 / 292

120Eg User Guide - Appendix D
D - 5
■
After completing Express Setup, see "Setup for Solving
Problems" described later to specify the settings for trouble
recovery such as "Specifying Memory Dump".
Installing on the Mirrored Volume
If you want to install Windows Server 2003 on the volume that is mirrored using "Disk
Management", invalid the mirroring before operating the installation to set back to the
basic disk, and valid the mirroring again after the installation has completed.
Creating, invalid, delete mirror volume can be operated from "Disk Management" in
"Computer Management".
Connecting MO Device
If you operate installing Windows Server 2003 with MO device connected, the
installation may not be completed normally. In such case, detach MO device and then
re-install the system from the beginning.
Connecting Hard Disk Drive
Connect the hard disk drive, such as data hard disk drives, that OS is not going to be
installed on after installing OS.
If you create multiple logical drives in your system, refer to "Re-installing the
operation system when multiple logical drives exist" (Appendix D).
Creating Partition Size
The minimum size for the partition that the system is to be installed can be calculated
from the following formula.
Size necessary to install the Paging File Size + Dump File Size
Size necessary to install the system= 2900 MB
Paging File Size (Recommended)= Mounted Memory Size × 1.5
Dump file Size= Mounted Memory Size + 12 MB
Caution
■
The above paging file size is necessary for collecting debug
information (memory dump). If you set the default value of
paging file size smaller than the 'recommended' value, the
accurate debug information (memory dump) may not be
collected.
■
The maximum paging file size which can be set on one
partition is 4095 MB. If the above paging file size exceeds
4095 MB, specify 4095 MB for the paging file size.