NEC Express 5800 120Eg, User Manual

Page: 80 / 292

120Eg User Guide - Configuring Your System
3 - 8
Floppy Configuration Submenu
Super I/O Configuration Submenu
USB Configuration Submenu
IDE Detect Time
Out (Sec)
0, 5, 10, 15, 20, 25,
30, 35
Select the time out value for
detecting ATA/ATAPI devices.
This option is used to detect an
older IDE device with longer
spin up times.
ATA(PI) 80Pin
Cable Detection
Host & Device
Host
Device
Uses a mechanical 80-pin
interface cable to detect the
host and/or device(s).
Table 3 - 8: Floppy Configuration Submenu
Feature Choices or
Display Only Description Your Setting
Floppy A Disabled
720Kb 3½
1.44/1.25MB 3½
2.88MB 3½
Allows you to configure floppy
drive A.
Onboard Floppy
Controller
Disabled
Enabled
Disables or enables the
onboard floppy disk drive
controller.
Table 3 - 9: Super I/O Configuration Submenu
Feature Choices or
Display Only Description Your Setting
Serial Port A
Address
Disabled
3F8/IRQ4
3E8/IRQ4
2E8/IRQ3
Disables or selects the I/O port
address and interrupt for serial
port A
Serial Port B
Address
Disabled
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disables or selects the I/O port
address and interrupt for serial
port B
Table 3 - 10: USB Configuration Submenu
Feature Choices or
Display Only Description Your Setting
USB Devices
Enabled
Display only Displays a list of the USB
devices detected by the BIOS.
USB Function Disabled
Enabled
If disabled, the USB ports do
not support class 3 USB
devices (HID: Human Interface
Device).
Legacy USB
Support
Disabled
Enabled
Selects whether the USB
keyboard is made available in
OS which does not support
USB formally.
Table 3 - 7: IDE Configuration Submenu (Continued)
Feature Choices or
Display Only Description Your Setting